1/4 x 1/8 Inch Neodymium Rare Earth Countersunk Ring Magnets N52 (50 Pack)
1/4 x 1/8 Inch Neodymium Rare Earth Countersunk Ring Magnets N52 (50 Pack)
| Quantity of Packs | Price per Pack | Discount |
|---|---|---|
| Buy 2 | $21.85/pack | 5% Off |
| Buy 3 | $20.70/pack | 10% Off |
| Buy 5 | $19.55/pack | 15% Off |
| Buy 10 | $18.40/pack | 20% Off |
| Buy 25 | $17.25/pack | 25% Off |
| Buy 50 | $16.10/pack | 30% Off |
| Buy 100 | $14.95/pack | 35% Off |
Magnet Specifications
| Imperial Size | 0.25 x 0.125 Inch (Outer Diameter x Thickness) |
|---|---|
| Metric Size | 6.35 x 3.175 mm (Outer Diameter x Thickness) |
| Countersunk Hole Size | 0.182 x 0.107 Inches at 82° |
| Countersunk Hole Location | One Side, Paired N & S (Equal Quantity of Each) |
| Screw Size | #2 |
| Material Grade | N52 |
| Pull Force | 1.4 lbs |
| Coating | Nickel-Copper-Nickel (Ni-Cu-Ni) |
| Magnetization Direction | Axially - Pair |
| Magnet Material | Sintered Neodymium (NdFeB) |
| Tolerance | +/- 0.004 Inches |
| Max Operating Temperature | 80°C / 176°F |
| Flux Density (Br) | 14,800 Gauss |
| Part Number | DCS14X18N52-50PK |
| Quantity Included | 50 Countersunk Ring Magnets |
Produced in an ISO 9001 Facility
Manufactured to Meet RoHS & REACH Standards
Magnet Description
Our small grade N52 rare earth neodymium disc magnets, measuring 1/4 x 1/8 inch (Outer Diameter x Thickness), are a strong and cost-efficient solution for your lightweight magnetic needs. With a pull force of 1.4 lbs, these small but mighty round magnets have a broad range of applications including injection molding, science projects, craft projects, woodworking, and 3d printing to name a few!
These disc magnets are also great for industrial and business applications. Their high quality and precision manufacturing guarantees that they provide superior magnetic strength and performance even in demanding environments.
These rare earth magnets are designed to last a lifetime and are made of quality grade N52 neodymium (NdFeb) material.
If you are looking for a reliable magnet that is small but powerful, our 1/4 x 1/8 inch (Outer Diameter x Thickness) N52 rare earth neodymium disc magnets are an excellent choice. Order now and experience the strength of these impressive magnets in your next project!
Sold in Matched North/South Pairs
This pack includes 25 magnets with the countersink on the north face and 25 with the countersink on the south face, so one of each makes a pair that attracts.
Mount one magnet from each group on opposite sides of a cabinet door, lid, latch or display, and their exposed faces will pull together. Before you install, sort the pack into two piles by testing which magnets attract face to face, then mark the piles so they don't get mixed up. If one side is steel instead, any magnet in the pack will work, since both poles attract steel equally.
Need a different north/south split? Please contact us.
Learn more:
Are the Countersunk and Self-Adhesive Magnets Paired Equally North/South?
Installing Countersunk Magnets: Snug, Not Tight
Tighten each screw only until its head sits flush with the magnet, then stop. Neodymium is hard but brittle, so it can't flex like a steel washer. Once the screw head seats, every extra turn wedges it deeper into the countersink and can crack the magnet around the hole.
Use #2 flat-head screws. Avoid pan-head and round-head screws, which press on the thin edge of the hole.
Drive the screw by hand when you can. If you use a drill/driver, set the clutch to a low number, drive slowly, stop about one turn early and finish by hand. Don't use an impact driver or drill mode. Mount the magnet on a flat surface over a pilot hole, because a bump or glue drip underneath can crack it as you tighten.
Learn more:
How Do I Install Countersunk Magnets Without Breaking Them?
Can I Use Metric and Imperial Screws Interchangeably With Countersunk Magnets?
- Magnet Safety Information
- RoHS/REACH Compliance
- 30 Day Return Policy
- Specification Sheet (PDF) (opens in a new tab)
- Technical Drawing (PDF) (opens in a new tab)
- 3D CAD Model (STEP)
Dimensions are nominal; see the drawing for tolerances. STEP files open in SolidWorks, Fusion, Onshape, FreeCAD and most other CAD software.
Cross-Reference Part Numbers: R422CS-P-N52, R422CS-N-N52, R422CS-S-N52
Other companies' part numbers that match this magnet's published grade, size, coating and features. Not affiliated or endorsed; please confirm fit for your application.
