Make Your Nanoleaf LED Light Panels Magnetic

Short answer

Stick a 1/2 × 1/16 Inch Disc Magnet with 3M Adhesive to the back of each corner of your light panel. The panel then hangs on any steel surface, such as a steel door, cabinet or metal wall panel, and you can rearrange the layout whenever you like.

Light panels held on a steel surface by adhesive magnets, with a side view of the mounting Steel Door, Cabinet or Wall PanelLift Off and RearrangeAnytime, No New HolesSide View1/2 × 1/16 InchMagnetLight Panel3M AdhesiveSteel Surface
Light panels held on a steel surface by adhesive magnets, with a side view of the mounting Lift Off and RearrangeAnytime, No New HolesSteel Door, Cabinet or Wall PanelSteel Door, Cabinet or Wall PanelLift Off and RearrangeAnytime, No New HolesSide View1/2 × 1/16 InchMagnetLight Panel3M AdhesiveSteel Surface
Adhesive magnets hold each panel flat against the steel, so you can lift one off and move it without tools or new holes.
  1. Clean the back corners of each panel with isopropyl alcohol.
  2. Peel and press one adhesive magnet onto each corner. Press firmly for several seconds.
  3. Wait 24 to 48 hours for the adhesive to cure.
  4. Hang the panels on any steel surface and arrange them.

No Steel Wall?

Stick Adhesive Steel Discs to the wall where the magnets will land. See using steel strike plates.

Back of a triangular LED light panel with an adhesive neodymium magnet near each corner NNNNSSOne 1/2 × 1/16 Inch AdhesiveMagnet in Each CornerKeep Magnets Clear ofthe Connector SlotsEither Pole Can Face the Wall:Polarity Doesn't Matter on SteelNNCorner Detail:About 1/4 infrom the Edges
Back of a triangular LED light panel with an adhesive neodymium magnet near each corner NNNNSS123NNCorner Detail:About 1/4 infrom the Edges1One 1/2 × 1/16 Inch AdhesiveMagnet in Each Corner2Keep Magnets Clear ofthe Connector Slots3Either Pole Can Face the Wall:Polarity Doesn't Matter on Steel
One adhesive magnet near each corner on the back of the panel, clear of the connector slots.

Continue Learning

More on Projects & Uses