3/4 x 3/4 x 1/4 Inch Neodymium Rare Earth Double-Sided Countersunk Block Magnets N52 with Black Epoxy (4 Pack)

3/4 x 3/4 x 1/4 Inch Neodymium Rare Earth Double-Sided Countersunk Block Magnets N52 with Black Epoxy (4 Pack)

3/4 x 3/4 x 1/4 Inch Neodymium Rare Earth Double-Sided Countersunk Block Magnets N52 with Black Epoxy (4 Pack)

  • $ 25.29 USD $25.29


✓ In Stock - Ships Free Within 1 Business Day

Buy More and Save up to 35%
Quantity of Packs Price per Pack Discount
Buy 2 $24.03/pack 5% Off
Buy 3 $22.77/pack 10% Off
Buy 5 $21.50/pack 15% Off
Buy 10 $20.24/pack 20% Off
Buy 25 $18.97/pack 25% Off
Buy 50 $17.71/pack 30% Off
Buy 100 $16.44/pack 35% Off
Need more than 100 packs? Email us for a quote.


Magnet Specifications

Imperial Size 0.75 x 0.75 x 0.25 Inch (Length x Width x Thickness)
Metric Size 19.05 x 19.05 x 6.35 mm (Length x Width x Thickness)
Countersunk Hole Size 0.295 x 0.17 Inches at 82°
Countersunk Hole Location Both Sides (Double Countersunk)
Screw Size #6
Material Grade N52
Pull Force 22.1 lbs
Coating Black Epoxy
Magnetization Direction Thickness
Magnet Material Sintered Neodymium (NdFeB)
Tolerance +/- 0.004 Inches
Max Operating Temperature 80°C / 176°F
Flux Density (Br) 14,800 Gauss
Magnet Weight 16.4 Grams
Part Number BDCS34X34X14N52-BE-4PK
Quantity Included 4 Countersunk Block Magnets

Produced in an ISO 9001 Facility
Manufactured to Meet RoHS & REACH Standards



Black Epoxy Coating

Epoxy coated magnets are commonly used in industrial and commercial applications due to their exceptional corrosion and chemical resistance, making them ideal for outdoor or marine environments.

Interested in more epoxy coated magnets? Shop our full selection of waterproof epoxy coated magnets.


Installing Countersunk Magnets: Snug, Not Tight

Tighten each screw only until its head sits flush with the magnet, then stop. Neodymium is hard but brittle, so it can't flex like a steel washer. Once the screw head seats, every extra turn wedges it deeper into the countersink and can crack the magnet around the hole.

Use #6 flat-head screws. Avoid pan-head and round-head screws, which press on the thin edge of the hole.

Drive the screw by hand when you can. If you use a drill/driver, set the clutch to a low number, drive slowly, stop about one turn early and finish by hand. Don't use an impact driver or drill mode. Mount the magnet on a flat surface over a pilot hole, because a bump or glue drip underneath can crack it as you tighten.

Learn more:
How Do I Install Countersunk Magnets Without Breaking Them?
Can I Use Metric and Imperial Screws Interchangeably With Countersunk Magnets?

Dimensions are nominal; see the drawing for tolerances. STEP files open in SolidWorks, Fusion, Onshape, FreeCAD and most other CAD software.